Tile Repair Kit: A Comprehensive Guide

With a tile repair kit you can repair your broken tile and restore the look of your bathroom

The Tile Repair Kit is an innovative product designed to repair tiles quickly and easily. It is ideal for repairing wall and floor tiles. With this set you can quickly remove small flaws on ceramic tiles and porcelain stoneware.

1. Use of the tile repair kit

1.1 Applications of the Tile Repair Kit

The tile repair set is versatile. It can be used to:

• Repair edge damage
• compensate for scratches
• to make burn holes disappear
• to remove abrasions
• refill the boreholes
• to cover up small holes
• to fix chipping

1.2 What is included in the scope of delivery of the tile repair kit?

The set contains 15 paint sticks, a filler plane including fleece and small sanding and polishing cloth, a battery melter including 3 batteries, a cotton cloth, a sealing stick, icing wax and step-by-step instructions.

1.3 The tile repair kit is used for:

• Replace broken tiles
• Sanding tile edges
• mending tiles

2. Step-by-step instructions for using the tile repair kit

2.1 Preparation

Before you start the repair, make sure that the area to be repaired is clean, dry and free of grease. Remove protruding parts and look for the matching shades. The colors in the set are freely mixable, so you can always get the right shade.

2.2 Melting

Activate the melter and hold a matching paint stick to the hot melt tip.

2.3 Contribution

Introduce the melted filler into the damaged area with the melting tip. The damaged area should always be somewhat overfilled. Then clean the tip carefully with the cotton cloth.

2.4 Remove plan

Use the sharp grooves of the filler plane to remove any excess material.

2.5 Color Customization

If the color of the filled area is not quite right, you can adjust it at any time.

2.6 Degreasing

Degrease the filled area with the gray fleece from the filler plane.

2.7 Seal

Now you can seal the area. To do this, first shake the pen. Then hold the pen over the cotton cloth and gently press the marked "P". The paint flows into the brush tip. The tip should be wiped off lightly on the cotton cloth so as not to seal too wet. To protect the area from dirt and dust, you can treat it with the sealing stick. Only paint the damaged area and only paint in one direction.

2.8 Adjust gloss level

Allow the damaged area to dry. The drying process takes about 10-15 minutes at room temperature. After this time you can adjust the shine with the cloth. The green side is for polishing. This gives the spot more shine. The opposite effect is achieved with the white side, the area is matted.

3. Scope of delivery of the tile repair kit

The tile repair kit includes:

• 15 color bars, 4cm, (white, sand grey, black, beige, caramel, light, copper, olive brown, yellow, red, and blue)
• 1x filler plane including fleece and small grinding and polishing cloth
• 1x battery melter including 3 batteries
• 1x cotton cloth
• 1x sealing pen
• glaze wax
• 1x step-by-step instructions

Good to know: The filler is very hard and resistant. Its melting point is 130°C and the water absorption is less than 1%.

4. Conclusion - The tile repair kit is an effective and quick way to repair a broken tile.

The Tile Repair Kit is a versatile and easy-to-use solution to tile repairs. Whether you're dealing with small holes, chips or edge damage, this kit has everything you need to get your tiles looking new again.

5. Frequently Asked Questions

1. Question: How long does the drying process take after sealing? Answer: The drying process takes about 10-15 minutes at room temperature.

2. Question: Can I mix the colors in the set? Answer: Yes, the colors in the set are freely mixable, so you can always get the right shade.

3. Question: Is the tile repair set only suitable for ceramic tiles? Answer: No, the set can be used with both ceramic tiles and porcelain stoneware.

4. Question: How resistant is the filler? Answer: The filler is very hard and durable. Its melting point is 130°C and the water absorption is less than 1%.