Set the correct speed for tile cutting flex
When cutting tiles Flex, it is particularly advisable to pay attention to the correct speed.
Difficulty: Easy | Costs: approx. 0 euros | Workload: approx. 5 minutes
Adjusting the Flex speed correctly when cutting tiles is not a problem. If you know where to find this information. We give you our standard recommendation and show you where you can find the information for your cutting disc .
Table of contents
Our standard recommended speeds for diamond cutting discs when cutting Flex Tiles
Standard speeds are recommendations on our part. Depending on the diamond disc , these can be sufficient for very good or rather normal results. In any case, you should adjust the speed as soon as you notice that it is not cutting as desired.
| diameter tiles Flex disc |
Recommended RPM for tile cutting discs Flex and larger |
| 115mm | 13,600 rpm |
| 125mm | 12,000 rpm |
| 150mm | 10,200 rpm |
| 180mm | 8,500 rpm |
| 200mm | 7,650. rpm |
| 230mm | 6,800 rpm |
| 250mm | 6,150 rpm |
| 300mm | 6,370 rpm |
| 350mm | 5,500 rpm |
| 400mm | 4,800 rpm |
Cutting tiles Flex - speed information can be found on the diamond blade
Every good diamond cutting disc has an imprint on the front side with information on the correct number of revolutions.
Alternatively, the speed of the tile cutting disc could be printed on the packaging.