Drilling tiles in a rented apartment?
Tiles must not always be drilled in the rented apartment - we will give you our assessment
1. The legal bases
In Germany there are some legal regulations that affect the drilling of tiles in a rented apartment.
In principle, tenants are allowed to make small structural changes in their apartment as long as they can restore the original condition when they move out. However, there are some special features to consider when it comes to tiles.
1.1 The Rental Agreement Terms
In many leases, drilling tiles is explicitly forbidden or only allowed with the consent of the landlord. Therefore, you should check your rental contract carefully before you start drilling. If you are unsure, it is advisable to contact the landlord and ask for permission.
1.2 Obtain the consent of the landlord
If drilling tiles is not expressly forbidden in your rental agreement, you should still consult your landlord.
Explain your plan to him and make sure you have his approval before you get started. In this way you avoid later discrepancies or possible claims for damages.
Our tip: If drilling is not allowed, you can try gluing.
2. Preparation for drilling tiles
2.1 Choosing the right drilling technique
There are different drilling techniques that are suitable for drilling tiles. The most common are wet drilling and dry drilling.
- With wet drilling, the tile is cooled with water while it is being drilled, which reduces the risk of cracking or cracking.
- With dry drilling, on the other hand, the tile is drilled without cooling. You can also significantly reduce the risk of broken tiles by using a diamond tile drill bit .
2.2 Finding the right tool
For drilling tiles you need a drill with a suitable drill bit. Special tile drills or diamond drills that are designed for the material tile are best suited. Make sure the drill bit is the right size for your project to avoid damaging the tiles.
2.3 Explore tiles and joints
Before drilling, you should examine the tiles and joints closely to identify any cavities or unevenness. This allows you to ensure that you are drilling in a suitable spot and not damaging any wires or pipes.
3. Drilling tiles step by step
3.1 Mark tiles
First mark the spot where you want to drill with a permanent marker or tape. This will prevent the drill bit from slipping and damaging the tile.
3.2 Set drill and drill
Set the drill to low speed and use the right size tile or diamond drill bit. When drilling wet, you should wet the tile with water while drilling to cool it and prevent cracking.
3.3 Drilling tiles
Place the drill carefully on the marked spot and start drilling slowly. Be careful not to apply too much pressure to avoid damaging the tile. Once you've drilled through the tile, you can increase the speed and keep drilling until you reach the desired depth.
3.4 Attach dowels and screws
After drilling, place a suitable dowel in the drill hole and then fasten the screw or hook. Make sure the anchor is tight and don't over tighten the screw to avoid damaging the tile.
4. Avoid and repair damage
4.1 Avoid breaking tiles
To avoid breaking tiles when drilling, you should proceed slowly and carefully and use the right drilling technique and the right tool. If you are unsure about drilling the tiles yourself, consult a professional.
4.2 Repair damage to tiles
If, despite all caution, the tile is damaged, there are a number of ways to repair it. Minor cracks or chips can be repaired with tile filler or tile paint.
In the event of major damage, it may be necessary to replace the affected tile. In this case, you should consult a professional to avoid further damage.
Conclusion - Drilling tiles in a rented apartment may be allowed.
Drilling tiles in a rented apartment is not always permitted and should be discussed with the landlord beforehand. If you have permission to drill tiles, be sure to use proper drilling technique and tools to avoid damaging the tiles.
Go slowly and carefully, following the steps above to get a clean and precise result.
FAQs - Frequently asked questions about drilling tiles in a tenancy
1. Can I drill tiles without asking my landlord for permission?
It's always a good idea to get the landlord's permission before drilling any tile in the rental property. Also check your rental agreement to see whether drilling tiles is permitted or prohibited.
2. What happens if I damage a tile while drilling?
Minor damage can be touched up with tile filler or a tile paint pen . In the event of major damage, it may be necessary to replace the affected tile . In this case, you should consult a professional.