Welcher Fugenbohrer für Fliesen?

Which joint drill for tiles?

1. A suitable joint drill is required for drilling tile joints.

Tile joint drills are important tools for processing tile joints. If you make the right choice, you can successfully drill your tiles without damaging them.

In this article you will learn how to choose the right tile joint drill.

1.1 The most important points at a glance

Joint Drill Key Take Aways

  • Choose a tile grout drill that is no wider than the grout itself to avoid damaging the tiles.

  • Suggested tile crevice bits are carbide tile bits , masonry bits, and concrete bits.

  • When it comes to tenant rights and agreements, always get permission from the landlord before drilling in tile.

  • If you are unsure or lack experience, it may make sense to consult a professional tiler in order to achieve the best results.

2. Introduction to tile joint drilling

Installation of items after grouting - In the picture a bathroom mirror

Drilling tile joints requires precision and the right tool. A tile grout drill allows you to drill holes in the grout , for example to:

  • Hook
  • shelves
  • Mirror
  • or attach other fasteners.

However, when choosing the right tile grout bit, certain factors need to be considered in order to achieve the best results.

3. Understand tile joints

Tile joints during grouting

Before choosing a tile grout bit, it is important to understand the properties of the tile grout.

Tile joints are usually made of a softer material than the tiles themselves to accommodate movement and stress.

Our tip: It is therefore important that the joint drill is not wider than the joint itself, so as not to damage the tiles.

4. Recommended tile grout drill

Picture of different drills that are suitable for drilling joints in tiles

There are different types of tile joint drills that are suitable for drilling tile joints. Here are some recommended options:

1. Carbide tile drill bit

Carbide tile drill bits are specially designed for drilling tiles. They feature sharp carbide tips that can precisely penetrate tile joints without damaging the tile material. This type of drill is ideal for ceramic and porcelain tiles.

2. Masonry drill

Masonry drill bits are robust drill bits that can also be used for drilling tile joints.

They are suitable for hard materials such as natural stone tiles. Make sure the diameter of the masonry bit is not larger than the width of the joint to avoid damage.

3. Concrete drill

Concrete drill bits are suitable for drilling joints in tiles with high hardness and strength. They can be used to drill joints in concrete tiles.

Make sure the drill bit is sharp and that you are drilling at low speed to avoid chipping or chipping the tiles.

4. Tips for using the tile joint drill

Here are some tips to keep in mind when drilling tile grout:

Image of a handyman with a thumbs up

  • Mark where you want to drill the joint to be precise.

  • Use a suitable drill no wider than the joint itself.

  • Make sure the drill bit is sharp to allow easy penetration into the joint.

  • Drill at low speed and with gentle pressure to avoid damaging the tile.

  • Hold the drill perpendicular to the tile surface to drill a clean and precise hole.

  • Regularly remove drill dust from the hole to maintain optimal drilling performance.

  • Use coolant if necessary to avoid overheating the drill.

5. Can everyone drill their tiles ?

It's important to note that not everyone has the right to drill their tiles. If you are a renter, you should always get your landlord's permission before drilling in tile.

In some cases, it may also make sense to call in a professional tiler to ensure the work is done professionally.

Conclusion - Drilling tile joints is not a problem if you choose the right drill bit.

When choosing a tile grout drill, it is important to consider the properties of the tile grout to avoid damaging the tiles. Carbide tile drill bits, masonry drill bits, and concrete drill bits are recommended options for drilling tile grout, depending on the type of tile and grout materials.

Follow the tips for using the tile grout drill for precise and clean results. Remember to exercise caution with tenant rights and agreements when it comes to drilling in tile.

6. Frequently Asked Questions (FAQs)

  1. Can I drill tile joints with a normal drill?

    No, it is recommended to use special tile joint drills to avoid damaging the tiles.

  2. How do I avoid damaging the tiles when drilling tile joints?

    Be sure to use a drill bit no wider than the joint itself and hold the drill bit perpendicular to the tile surface.

  3. As a tenant, can I drill my tiles myself?

    As a renter, you should always get your landlord's permission before drilling in tile.

  4. What type of drill is best for natural stone tiles?

    Stone drill bits are ideal for drilling joints in natural stone tiles.

  5. When should I call in a professional tiler?

    If you are unsure or inexperienced in drilling tiles, it may be wise to seek the help of a professional tiler to avoid damage and ensure a quality result.
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

  • Bild von Jürgen Kleis Werkzeuge Experte - Tipps und Tricks rund um das Thema Handwerken und Heimwerken

    Jürgen Kleis

    "With my many years of experience in the tool industry, I can give you helpful tips and tricks for DIY and handicrafts".

    To the author page 
  • Other helpful platforms

    I try to give the community at all available levels tips for building a house, renovating or gardening.